Dimensions (Note that, in English-speaking countries, even those commonly using metric measurements now, locker dimensions are usually clean numbers of inches or feet, while the corresponding metric measurements are uneven, involving decimal places when precision is required, presumably resulting from continued use of locker designs based on feet and inches, unchanged for decades other than for cosmetic features.):
Lockers are only available to currently enrolled students and current employees.  The University is not responsible for the contents of any locker.  Users must use the lock provided by Roosevelt University.  No stickers or posters are allowed on the lockers.  No dangerous or illegal items may be stored in lockers at any time.  Items causing unpleasant odors are not allowed.  Lockers must be able to be fully closed at all times.   Roosevelt University reserves the right to open lockers at its discretion at any time and to remove any items it believes compromises the safety or environmental quality of Roosevelt University.   Roosevelt University reserves the rights to charge for damages to the locker and may cancel this rental agreement at any time for any reason.
In many ways, Foot Locker is taking an approach like that of Walmart, which has been acquiring online brands including Art.com, Jet.com and clothing retailers Bonobos and Modcloth. These acquisitions give Walmart access to customer data, but more importantly teams of young and hungry retail entrepreneurs. That's how it got Jet.com founder Marc Lore, who now lead's Walmart's U.S. e-commerce business.
Foot Locker's investment in Rockets of Awesome is part of the online retailer's $19.5 million Series C funding round. Now, Rockets of Awesome — which hasn't had much of a bricks-and-mortar presence other than a handful of pop-up shops — will be opening ministores within Kids Foot Locker locations across the country. Rockets of Awesome is also going to begin selling on Foot Locker's children's website.

Quality Refurbishing Many of the old, wholesale lockers we have in stock have minimal damage and some are near brand-new condition. For lockers that need repairs, our unique multiple point inspection and repair process helps to refine these lockers to a high quality, salvaged state. We know you want to buy quality lockers and we will not be shipping out lockers that are not fully functional. To get the most out of your refurbished locker, we also offer tips on alternative ways you can utilize them. Don't want to have the same old wall locker look? Use one as a laundry room locker or a console table.
Large Variety Whether you're looking for vintage, modern, or anything in between for storage, we've got used lockers for you. We specialize in discount used lockers that can be utilized for employees at work, military personnel, students at school, or personal use at home for adults and kids. We have an array of materials to choose from including metal, wood, and steel for whatever you need to purchase. We've got used lockers for every occasion from football gym room lockers to industrial work benches. Want more colors than just standard grey or red? We provide a plethora of custom colors to truly personalize your product.
Est. in 1936, Salsbury Industries is home to both our lockers.com & mailboxes.com websites. The industry leader in the manufacturing & distributing of quality metal lockers, wood lockers, plastic lockers & storage solutions. Salsbury Industries manufacturing facilities are vertically integrated. Headquartered just minutes from downtown Los Angeles.

Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.
Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Plastic Lockers are ideal for high-humidity applications, as these virtually maintenance-free lockers will never rust, rot, corrode or fade. These lockers are available in multiple configurations and are backed by a 15-year warranty. Optional configurations like Lattice Lockers, or doors with other non-standard vents can be obtained through ASI Storage Solutions. Please consult our customer service team to be advised on changes in pricing and delivery lead times for all non-standard items.
The visually appealing and very durable Traditional Collection is our most widely distributed locker line. Offering the most value for typical locker applications, this collection is available in a full range of spacious sizes, from single- to six-tier configurations, as well as two-person, 16-person and wall-mounted. The addition of our new 2 person Z-Locker completes the Traditional collection.
There is an honest way for supporters of a nationwide popular vote to eject the Electoral College, and that is to take away its accreditation by way of a constitutional amendment to repeal it. But that would take 2/3 of both houses of Congress and 3/4 of the states, and apparently that task gives opponents of the Electoral College the vapors.Much easier, they think, to perform an end-run on the US Constitution's amendment process through the National Popular Vote Interstate Compact.Interstate compacts are for regional cooperation in governing the use of river water, for example, or in agreeing that if a nurse in one state passes that state's licensing requirements, other states will accept that nurse's license to practice.Interstate compacts are not for the purpose of subverting the US Constitution.I hate the Electoral College, it's antiquated and obsolete, in my opinion. But I don't support the NPVIC.If people think our politics are divisive now, just wait to see what happens if the NPVIC is adopted by 270 electoral votes' worth of states.So, call Governor Polis' office at 303-866-2471 and tell him to veto senate bill 19-042, the National Popular Vote Interstate Compact. Be sure to mention the bill number! I do, however, like the idea of proportional electoral votes from each state. Winner-take-all is nowhere mentioned in any form in the US Constitution. Maine and Nebraska have the right idea.
×