Editor's note: Contact7 seeks out audience tips and feedback to help people in need, resolve problems and hold the powerful accountable. If you know of a community need our call center could address, or have a story idea for our investigative team to pursue, please email us at [email protected] or call (720) 462-7777. Find more Contact7 stories here .
When it comes to adventurous living, Denver ranks as one of the most outdoorsy cities in the United States. Whether it’s hiking up mountains or skating down the winding mountain-roads in nearby Boulder, Denver is a great place to be outdoors and enjoy that adrenalin rush. So naturally, if you have a long stopover in Denver, or quite a bit of time on your hands before that big conference, you’ll need to find Denver luggage storage so you can make the best of it.
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
Lockers are only available to currently enrolled students and current employees.  The University is not responsible for the contents of any locker.  Users must use the lock provided by Roosevelt University.  No stickers or posters are allowed on the lockers.  No dangerous or illegal items may be stored in lockers at any time.  Items causing unpleasant odors are not allowed.  Lockers must be able to be fully closed at all times.   Roosevelt University reserves the right to open lockers at its discretion at any time and to remove any items it believes compromises the safety or environmental quality of Roosevelt University.   Roosevelt University reserves the rights to charge for damages to the locker and may cancel this rental agreement at any time for any reason.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
The storage lockers were a “pilot,” the kind of small test that city government frequently uses to test a new or controversial idea. The city offered up the lockers for individuals to use for months-long stretches. At the time, city officials warned that “misuse of the lockers, vandalism, or other unanticipated results,” could force them to cancel the project.
Your industrial-style loft melds hardwood floors, exposed duct work, and stainless steel appliances beautifully, but the struggle is creating a cohesive design with your decor. Mix new and old, cold metal and warm woods to fit this style, and start with a signature piece, such as used school lockers. These lockers are industrial in nature, and whether the metal is flawlessly finished in a bright color or boasts naturally-occurring rust from years of neglect, they fit in with this design style. Used school lockers also offer a functional storage space in various sizes, with lockers as small as 12 inches by 12 inches, and as large as 30 inches by 66 inches. Once you decide on your lockers, keep your storage solution as functional as possible with a school locker organizer to make the most of the space with hanging shelves or small magnetic holders. School locker magnets can be that extra little space you need to hold pens, business cards, reminder lists, and other small items. Finding the right design pieces for your industrial-style loft can be somewhat difficult, but the sellers on eBay have you covered with a large selection of vintage items like school lockers.
Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well.
For longer term storage, there are many self storage units around the metro area. Not cheap, but then neither is paying extra baggage fees and lugging around extra stuff not needed for another leg of your trip, as it sounds like Terry might be doing. For example, I found "Downtown Denver Self Storage" with units starting at $45 a month. http://www.downtowndenverstorage.com/
Wilderness Exchange is within walking distance of Union and they require you leave a bag with them when you go into the store, they may be willing to stash your bag for a few hours. No guarantee on that, but an option if you can't find anything else. They are only open 10am-6pm on Sundays, so you may have to wait around a bit or pick it up early depending on when you get there and will be leaving.
Your industrial-style loft melds hardwood floors, exposed duct work, and stainless steel appliances beautifully, but the struggle is creating a cohesive design with your decor. Mix new and old, cold metal and warm woods to fit this style, and start with a signature piece, such as used school lockers. These lockers are industrial in nature, and whether the metal is flawlessly finished in a bright color or boasts naturally-occurring rust from years of neglect, they fit in with this design style. Used school lockers also offer a functional storage space in various sizes, with lockers as small as 12 inches by 12 inches, and as large as 30 inches by 66 inches. Once you decide on your lockers, keep your storage solution as functional as possible with a school locker organizer to make the most of the space with hanging shelves or small magnetic holders. School locker magnets can be that extra little space you need to hold pens, business cards, reminder lists, and other small items. Finding the right design pieces for your industrial-style loft can be somewhat difficult, but the sellers on eBay have you covered with a large selection of vintage items like school lockers.

Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Available in single-, double- or triple-tier configurations, this collection features 14 gauge doors with 16 gauge full-height reinforcement channels, frame-secured 11 gauge frame hooks with protruding padlock hasps, and a maintenance-free, single-point latching system.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.
Stored my luggage for several hours at Lugden. Great location just across the street from Union Station. Spoke with the owner and he said he owns the parking spot so they are always there during the day. Prices were reasonable and I felt comfortable storing my bags there while I explored Denver. The owner was nice and gave me coupons for some local businesses.
Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.
Editor's note: Contact7 seeks out audience tips and feedback to help people in need, resolve problems and hold the powerful accountable. If you know of a community need our call center could address, or have a story idea for our investigative team to pursue, please email us at [email protected] or call (720) 462-7777. Find more Contact7 stories here .
Salsbury Industries 63000 Series Triple Tier Standard Lockers Salsbury Industries 63000 Series Triple Tier Standard Lockers are constructed of 16-gauge steel. Ideal for colleges H schools locker rooms employee changing rooms government agencies gyms and many other applications. Available as unassembled or assembled (additional charge for assembled).  More + Product Details Close
Wilderness Exchange is within walking distance of Union and they require you leave a bag with them when you go into the store, they may be willing to stash your bag for a few hours. No guarantee on that, but an option if you can't find anything else. They are only open 10am-6pm on Sundays, so you may have to wait around a bit or pick it up early depending on when you get there and will be leaving.

In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes.[1] However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks. 

Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

Buy Locker

×