Lockers are only available to currently enrolled students and current employees.  The University is not responsible for the contents of any locker.  Users must use the lock provided by Roosevelt University.  No stickers or posters are allowed on the lockers.  No dangerous or illegal items may be stored in lockers at any time.  Items causing unpleasant odors are not allowed.  Lockers must be able to be fully closed at all times.   Roosevelt University reserves the right to open lockers at its discretion at any time and to remove any items it believes compromises the safety or environmental quality of Roosevelt University.   Roosevelt University reserves the rights to charge for damages to the locker and may cancel this rental agreement at any time for any reason.
From our base in Denver, CO, Shelving Rack & Lockers, Inc. has been providing quality products such as pallet storage racks, industrial shelving, lockers, and allied products to customers in Colorado and nationwide since 1989. We carry a full line of industrial storage equipment from quality manufacturers. Our experienced staff can assist you in every aspect of your storage needs, from design through installation. 

Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.
Some schools in the United States have been reported to have abolished the use of lockers. Security concerns are cited as the reason for this, with the concern being that lockers may be used to store contraband items such as weapons or drugs or pornographic material.[1] There has been some controversy over in what circumstances school authorities or law-enforcement officials are permitted to search lockers, with or without informing the users, or with or without the users being present at the time of the search, and it has been considered a civil liberties issue, particularly in the U.S.

Discover how easy it is to take your bike along for the ride. All buses are equipped with bike racks on the front of the bus, except for the 16th Street Free MallRide and Free MetroRide. Our easy-to-use bike racks can hold two bikes and are available on a first-come, first-served basis. Our bike racks can hold adult and child bikes and can accommodate tires up to 2.35 inches in width. RTD is not responsible for lost or stolen bikes or damage to bikes due to improper loading.
Bicycle lockers are usually in outdoor locations near railway stations and the like where people may want to store bicycles securely. They are often banked together, with individual lockers shaped like an isosceles triangle for efficient and compact storage of a bicycle. This triangular shape permits the lockers to be grouped either in a radial pattern (with the sharpest points of the lockers together), or in a row in alternating orientations.

If you want lockers, welcome to the place that knows lockers! You will find we are a trusted, family-owned business that has become the largest vendor of lockers in North America and beyond. Here you can find all locker sizes, shapes and colors for schools, businesses and even for homes. Our guests tell us that they came to SchoolLockers.com because we have helped their friends and business associates choose the best lockers for their needs. When you take that wealth of experience plus our convenient and secure online shopping and combine those with the lowest shipping prices possible, you see why we are the locker authority. Give our friendly and knowledgeable staff a call, because we are always available and just a phone call away.
From our base in Denver, CO, Shelving Rack & Lockers, Inc. has been providing quality products such as pallet storage racks, industrial shelving, lockers, and allied products to customers in Colorado and nationwide since 1989. We carry a full line of industrial storage equipment from quality manufacturers. Our experienced staff can assist you in every aspect of your storage needs, from design through installation.
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
Locker doors usually have some kind of ventilation to provide for the flow of air to aid in cleanliness. These vents usually take the form of a series of horizontal angled slats at the top and bottom of the door, although sometimes parallel rows of small square or rectangular holes are found instead, running up and down the door. Less often, the side or rear walls may also have similar ventilation.
Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well.
To use an Amazon Locker as your shipping destination, find a Locker and add it to your Amazon address book. Then, during checkout, select the Locker as your shipping address. Once your package has been delivered, we will email you a unique 6 digit code. Simply visit your selected Locker and enter the code on the Locker's touchscreen, then remove your package after the Locker's door opens. Learn more about picking up a package from an Amazon Locker here.
PROTECT THIS CARD LIKE CASH. GiftCard may be applied towards any purchase at Foot Locker, Kids Foot Locker or Lady Foot Locker stores in the US or online at footlocker.com, kidsfootlocker.com or ladyfootlocker.com. Card may not be exchanged for cash & will not be replaced if lost or stolen. No variance from the terms & conditions will be allowed except where legally required. For card balance call 1.877.254.3333 (Toll Free). GiftCard is issued by Foot Locker Card Services LLC. STORE LOCATOR CALL: Foot Locker 1.800.991.6681; Lady Foot Locker 1.800.877.5239; Kids Foot Locker 1.800.991.6684
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.

Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
×