Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.


Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well.
There are plenty of convenient places to store your luggage in Denver, from downtown to Lincoln street to Capitol Hill and Commons park. The cost is just US$6 per day, and check in time is just 3 minutes. So basically, in the same time it took to make that instant cup of Ramen before rushing to the airport, you can be in and out the door with no luggage to weigh you down.
PROTECT THIS CARD LIKE CASH. GiftCard may be applied towards any purchase at Foot Locker, Kids Foot Locker or Lady Foot Locker stores in the US or online at footlocker.com, kidsfootlocker.com or ladyfootlocker.com. Card may not be exchanged for cash & will not be replaced if lost or stolen. No variance from the terms & conditions will be allowed except where legally required. For card balance call 1.877.254.3333 (Toll Free). GiftCard is issued by Foot Locker Card Services LLC. STORE LOCATOR CALL: Foot Locker 1.800.991.6681; Lady Foot Locker 1.800.877.5239; Kids Foot Locker 1.800.991.6684
Stored my luggage for several hours at Lugden. Great location just across the street from Union Station. Spoke with the owner and he said he owns the parking spot so they are always there during the day. Prices were reasonable and I felt comfortable storing my bags there while I explored Denver. The owner was nice and gave me coupons for some local businesses.
If you are paid through the fall semester, you must clean out your locker during finals week of the fall semester. If you are paid for fall and spring, you have to clean out your locker during finals week of the spring semester, but not during winter break between semesters. If you are paid through summer, you have to clean out your locker two weeks before school starts. Exception: If you renew your locker, you must clean your locker out by the end of the semester that you paid through, unless of course, it is through summer, and then you will need to clean out two weeks before the fall semester starts.

Locker doors usually have some kind of ventilation to provide for the flow of air to aid in cleanliness. These vents usually take the form of a series of horizontal angled slats at the top and bottom of the door, although sometimes parallel rows of small square or rectangular holes are found instead, running up and down the door. Less often, the side or rear walls may also have similar ventilation.
In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes.[1] However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.
Est. in 1936, Salsbury Industries is home to both our lockers.com & mailboxes.com websites. The industry leader in the manufacturing & distributing of quality metal lockers, wood lockers, plastic lockers & storage solutions. Salsbury Industries manufacturing facilities are vertically integrated. Headquartered just minutes from downtown Los Angeles.

In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes.[1] However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.


Discover how easy it is to take your bike along for the ride. All buses are equipped with bike racks on the front of the bus, except for the 16th Street Free MallRide and Free MetroRide. Our easy-to-use bike racks can hold two bikes and are available on a first-come, first-served basis. Our bike racks can hold adult and child bikes and can accommodate tires up to 2.35 inches in width. RTD is not responsible for lost or stolen bikes or damage to bikes due to improper loading.
Lockers are only available to currently enrolled students and current employees.  The University is not responsible for the contents of any locker.  Users must use the lock provided by Roosevelt University.  No stickers or posters are allowed on the lockers.  No dangerous or illegal items may be stored in lockers at any time.  Items causing unpleasant odors are not allowed.  Lockers must be able to be fully closed at all times.   Roosevelt University reserves the right to open lockers at its discretion at any time and to remove any items it believes compromises the safety or environmental quality of Roosevelt University.   Roosevelt University reserves the rights to charge for damages to the locker and may cancel this rental agreement at any time for any reason.

Plastic Lockers are ideal for high-humidity applications, as these virtually maintenance-free lockers will never rust, rot, corrode or fade. These lockers are available in multiple configurations and are backed by a 15-year warranty. Optional configurations like Lattice Lockers, or doors with other non-standard vents can be obtained through ASI Storage Solutions. Please consult our customer service team to be advised on changes in pricing and delivery lead times for all non-standard items.
Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria. The superior construction and materials used in the locker system make it adaptable to all types of facilities, including health clubs, country clubs and executive washrooms. Phenolic lockers can easily be customized. Please consult with ASI Storage for customization or options not shown in the catalog. Any customization is subject to a change in price and delivery lead times. Now available in color-thru phenolic colors upon request.
When looking at Pallet Racks as a storage solution, consider the needs along with the physical requirements of your business before investing in a complete pallet racking system. Industrial Storage Rack configurations should consider accessibility to individual loads (selectivity), handling time, the efficiency of space utilization (storage density), order fulfillment speed, along with acquisition expenses.

It's also important to note that Style Scores work as a complement to the Zacks Rank, our stock rating system that has an impressive track record of outperformance. Foot Locker currently has a Zacks Rank of #2 (Buy). Our research shows that stocks rated Zacks Rank #1 (Strong Buy) and #2 (Buy) and Style Scores of A or B outperform the market over the following one-month period.
The Pro Collection is specifically designed for applications that require easy access to uniforms and equipment. Select the configuration that best suits your needs by adding a lockable security box and/or a footlocker with a reinforced top that doubles as a seat. The open front and perforated sides allow for full ventilation, with a large dedicated storage area.
We have metal lockers for sale, yes, metal lockers that are designed for many applications like first responders of all types, school corridor lockers, employee lockers, high school lockers, Athletic lockers Footlockers, and Stadium® lockers that are ideally suited for athletic team rooms to store helmets, uniforms and gear for many different sports.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
For longer term storage, there are many self storage units around the metro area. Not cheap, but then neither is paying extra baggage fees and lugging around extra stuff not needed for another leg of your trip, as it sounds like Terry might be doing. For example, I found "Downtown Denver Self Storage" with units starting at $45 a month. http://www.downtowndenverstorage.com/
Having an off-site storage locker for your business means having an extra place to store all those old papers, overstock items and seldom-used equipment. Because your locker is easily accessible, you can get what you need when you need it. It's as convenient as keeping everything in the office, but you'll have more space to add a desk or build a bigger break room.

Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.

Constructed of 16-Gauge steel Salsbury 61000 series single Constructed of 16-Gauge steel Salsbury 61000 series single tier metal lockers offer privacy and space for personal storage needs. Single tier metal lockers are available in a gray tan or blue powder coated finish and as unassembled or assembled units. These durable lockers are available in heights of 5 ft. ...  More + Product Details Close
I am writing this review because the owner of Lugden, Mic, lost; "gave-away" my girlfriends suitcase when we were in Denver for a wedding the Sept. 15th, 2018 weekend.  I do NOT want anyone to deal with what we went through.  This seemed like a great idea to check our bags and walk around Denver for a few hours before having to catch the train to the airport, but after only checking our bag for an hour we went back by and my bag was sitting on the side of the van and her bag was completely gone! Again, out there for a wedding! She had shoes, jeweler, expensive purses and pictures of her and her deceased father that she takes everywhere with her to keep him close to her; but her bag was gone.  He had no system to track, had zero clue who he had given it and could not call any of the previous people that he had recently given their bags back to them.  He quickly ran off in side as I called to the police to get me his liability insurance policy and stated "Oh man I just remembered, her bag was really heavy right?  Some guy came by and said it was his bag and there were books in it so I let him take it."   WTF!!!!! How does someone take someone's checked bag and run off with it.  To make matters worse because we had a plane to catch I called his insurance company the following Monday and his "Insurance Representative" informed me that Lugged Inc has lapsed on their insurance and has zero liability coverage for instances like this.  

Your industrial-style loft melds hardwood floors, exposed duct work, and stainless steel appliances beautifully, but the struggle is creating a cohesive design with your decor. Mix new and old, cold metal and warm woods to fit this style, and start with a signature piece, such as used school lockers. These lockers are industrial in nature, and whether the metal is flawlessly finished in a bright color or boasts naturally-occurring rust from years of neglect, they fit in with this design style. Used school lockers also offer a functional storage space in various sizes, with lockers as small as 12 inches by 12 inches, and as large as 30 inches by 66 inches. Once you decide on your lockers, keep your storage solution as functional as possible with a school locker organizer to make the most of the space with hanging shelves or small magnetic holders. School locker magnets can be that extra little space you need to hold pens, business cards, reminder lists, and other small items. Finding the right design pieces for your industrial-style loft can be somewhat difficult, but the sellers on eBay have you covered with a large selection of vintage items like school lockers.
For longer term storage, there are many self storage units around the metro area. Not cheap, but then neither is paying extra baggage fees and lugging around extra stuff not needed for another leg of your trip, as it sounds like Terry might be doing. For example, I found "Downtown Denver Self Storage" with units starting at $45 a month. http://www.downtowndenverstorage.com/
Lockers are only available to currently enrolled students and current employees.  The University is not responsible for the contents of any locker.  Users must use the lock provided by Roosevelt University.  No stickers or posters are allowed on the lockers.  No dangerous or illegal items may be stored in lockers at any time.  Items causing unpleasant odors are not allowed.  Lockers must be able to be fully closed at all times.   Roosevelt University reserves the right to open lockers at its discretion at any time and to remove any items it believes compromises the safety or environmental quality of Roosevelt University.   Roosevelt University reserves the rights to charge for damages to the locker and may cancel this rental agreement at any time for any reason.
Wilderness Exchange is within walking distance of Union and they require you leave a bag with them when you go into the store, they may be willing to stash your bag for a few hours. No guarantee on that, but an option if you can't find anything else. They are only open 10am-6pm on Sundays, so you may have to wait around a bit or pick it up early depending on when you get there and will be leaving.
×