Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
Your industrial-style loft melds hardwood floors, exposed duct work, and stainless steel appliances beautifully, but the struggle is creating a cohesive design with your decor. Mix new and old, cold metal and warm woods to fit this style, and start with a signature piece, such as used school lockers. These lockers are industrial in nature, and whether the metal is flawlessly finished in a bright color or boasts naturally-occurring rust from years of neglect, they fit in with this design style. Used school lockers also offer a functional storage space in various sizes, with lockers as small as 12 inches by 12 inches, and as large as 30 inches by 66 inches. Once you decide on your lockers, keep your storage solution as functional as possible with a school locker organizer to make the most of the space with hanging shelves or small magnetic holders. School locker magnets can be that extra little space you need to hold pens, business cards, reminder lists, and other small items. Finding the right design pieces for your industrial-style loft can be somewhat difficult, but the sellers on eBay have you covered with a large selection of vintage items like school lockers.
Storage Auctions in Alabama | Storage Auctions in Arizona | Storage Auctions in California | Storage Auctions in Florida | Storage Auctions in Colorado | Storage Auctions in Delaware | Storage Auctions in Florida | Storage Auctions in Georgia | Storage Auctions in Illinois | Storage Auctions in Kansas | Storage Auctions in Kentucky | Storage Auctions in Maryland | Storage Auctions in Massachusetts | Storage Auctions in Mississippi | Storage Auctions in Missouri | Storage Auctions in Nevada | Storage Auctions in New Hampshire | Storage Auctions in New Jersey | Storage Auctions in New Mexico | Storage Auctions in New York | Storage Auctions in North Carolina | Storage Auctions in Ohio | Storage Auctions in Oklahoma | Storage Auctions in Pennsylvania | Storage Auctions in South Carolina | Storage Auctions in Texas | Storage Auctions in Vermont| Storage Auctions in Virginia

The visually appealing and very durable Traditional Collection is our most widely distributed locker line. Offering the most value for typical locker applications, this collection is available in a full range of spacious sizes, from single- to six-tier configurations, as well as two-person, 16-person and wall-mounted. The addition of our new 2 person Z-Locker completes the Traditional collection.
Unlike our competitors, we make it a point to refurbish all of our used lockers so that we can deliver a quality product for the cheaper price you want. With warehouses on the East and West coasts, we're able to store several lockers so that we can bring you the best selection possible. Find the shape, color, and size that works best for you with just a few clicks. Our site is simple to navigate, easing the process of buying so that you can spend more time on the things that matter to you. Need help? We're just a call or an email away and we're always happy to assist you at any stage of your buying process.
Teaming up with the Saint Francis Center, Denver is also planning on adding 200 more storage spaces at the organization’s employment service center, located near the city’s capital building. The contract between the city of Denver and the Saint Francis Center will start on June 1 and with $130,000 for the first year of storage space. After that, the center will be given $100,000 a year if the contract continues.
They are usually intended for use in public places, and intended for the short- or long-term private use of individuals for storing clothing or other personal items. Users may rent a locker for a single use or for a period of time for repeated use. Some lockers are offered as a free service to people partaking of certain activities that require the safekeeping of personal items.
I'm going to Denver for the first time in a few weeks. I'll be travelling lite with a backpack and smaller "purse" size bag. Is there a locker in downtown area where I can store the knapsack for a few hours while I walk around downtown. I know some cities have lockers at the greyhound or union station but I can't find that information anywhere on the web.
In the States everybody is so concerned about liability.... We tried to store at Hertz (where we dropped the rental); no storage facility, no luck. Try a hotel; I tried several, if you are not a guest then they are not allowed. I tried the Information Centre; no luck, they had some bad experiences.... in the past. But they could not realy help me any further. One advise: try the Greyhound Bus Center. And yes! there you can store your luggage. Even my somewhat bigger suitcase. The lockers are somewhat small but high and deep enough. First 3 hours is to be paid for; $ 3 and after that a dollar for an extra hour.
In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes.[1] However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.
Salsbury Industries offers a complete line of metal locker, steel locker, plastic locker, vented locker, wood locker and wire locker in a wide range of colors and styles, so you are sure to find the perfect locker that suits your needs. Our locker are used for a variety of applications such as employee locker, school locker, student locker, restaurant locker, day care locker, pool locker, gym locker, club locker, fire department locker, police locker, apartment lockers and home locker. We also offer a complete line of accessories including wood locker benches, aluminum locker benches, locker bases, side panels and locks to complete your project.

Editor's note: Contact7 seeks out audience tips and feedback to help people in need, resolve problems and hold the powerful accountable. If you know of a community need our call center could address, or have a story idea for our investigative team to pursue, please email us at [email protected] or call (720) 462-7777. Find more Contact7 stories here .
Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.
18 in. Wide Metal Locker offer ample space 18 in. Wide Metal Locker offer ample space for personal storage need. Ideal for government agencies law enforcements locker rooms employee changing rooms gyms and many other applications. These spacious lockers are six (6) feet high (add 6 in. for legs). Each compartment door include a lift up handle and ...  More + Product Details Close
Locker doors usually have some kind of ventilation to provide for the flow of air to aid in cleanliness. These vents usually take the form of a series of horizontal angled slats at the top and bottom of the door, although sometimes parallel rows of small square or rectangular holes are found instead, running up and down the door. Less often, the side or rear walls may also have similar ventilation. 

Dimensions (Note that, in English-speaking countries, even those commonly using metric measurements now, locker dimensions are usually clean numbers of inches or feet, while the corresponding metric measurements are uneven, involving decimal places when precision is required, presumably resulting from continued use of locker designs based on feet and inches, unchanged for decades other than for cosmetic features.):

Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.

With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Available in single-, double- or triple-tier configurations, this collection features 14 gauge doors with 16 gauge full-height reinforcement channels, frame-secured 11 gauge frame hooks with protruding padlock hasps, and a maintenance-free, single-point latching system.


With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications and has matching finish on all sides and top for a finished look. Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel brackets and fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.

When it comes to adventurous living, Denver ranks as one of the most outdoorsy cities in the United States. Whether it’s hiking up mountains or skating down the winding mountain-roads in nearby Boulder, Denver is a great place to be outdoors and enjoy that adrenalin rush. So naturally, if you have a long stopover in Denver, or quite a bit of time on your hands before that big conference, you’ll need to find Denver luggage storage so you can make the best of it.
×