In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes.[1] However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
Looking out for a Lockers, Shelving, Racks organization in Denver, Colorado? AIS Industrial and Construction Supply (Shelving Division) provides Sales, Assembly, Delivery, and Installation of Lockers, Shelving, Racks and Cabinets to Warehouse Storage Solutions – Business Storage Solutions in Arvada, Aurora, Broomfield, Commerce City, Dupont, Eastlake, Englewood, Golden, Henderson, Idledale, Littleton, Westminster, and Wheat Ridge. AIS Industrial and Construction Supply (Shelving Division) have been in business since 1941.
Lockers are only available to currently enrolled students and current employees.  The University is not responsible for the contents of any locker.  Users must use the lock provided by Roosevelt University.  No stickers or posters are allowed on the lockers.  No dangerous or illegal items may be stored in lockers at any time.  Items causing unpleasant odors are not allowed.  Lockers must be able to be fully closed at all times.   Roosevelt University reserves the right to open lockers at its discretion at any time and to remove any items it believes compromises the safety or environmental quality of Roosevelt University.   Roosevelt University reserves the rights to charge for damages to the locker and may cancel this rental agreement at any time for any reason.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Don't take chances with a small storage company that doesn't have the nationwide resources like CubeSmart to ensure that customer service is prioritized. We're in it for the long-haul and we recognize that your satisfaction is instrumental to our success. We think you should expect more from storage and our locations in and around Denver are ready to exceed your expectations.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
All countries United Kingdom Italy United States Spain Netherlands France Canada Australia Hungary Czech Republic Germany Brazil Portugal Slovakia Ireland Argentina Croatia Bulgaria Denmark Poland Greece Serbia Thailand Philippines Nepal Mexico Russia Finland Belgium Malaysia Lithuania Malta South Korea Norway Estonia Hong Kong Japan Switzerland Sweden Austria Latvia Slovenia Singapore Romania Ukraine
I'm going to Denver for the first time in a few weeks. I'll be travelling lite with a backpack and smaller "purse" size bag. Is there a locker in downtown area where I can store the knapsack for a few hours while I walk around downtown. I know some cities have lockers at the greyhound or union station but I can't find that information anywhere on the web.
There are a number of features or characteristics which may vary in lockers. Because purchasers will need to specify what they want in each of these when ordering, it is more common to order a particular configuration rather than buy "off the shelf" in a shop, although certain very common configurations can be found in shops fairly easily. These features include:

18 in. Wide Metal Locker offer ample space 18 in. Wide Metal Locker offer ample space for personal storage need. Ideal for government agencies law enforcements locker rooms employee changing rooms gyms and many other applications. These spacious lockers are six (6) feet high (add 6 in. for legs). Each compartment door include a lift up handle and ...  More + Product Details Close


Your locker is your home away from home - but only for a few moments at a time. Organizing your locker to be able to quickly grab your books, binders, and supplies can make sure you make it between classes on time, leave more time for hanging out with friends, and keep you going through the day. Locker shelves are the most basic of locker organizers - they double your space, they keep too much from piling up at the bottom, and make it easy to see all of your things. Magnetic bins for your locker door can add storage for smaller items, extra pens and other pocketables. And decorations and locker lights can help you give your locker a style all its own.

Salsbury Industries is proficient at shipping a wide selection of metal lockers, wood lockers, plastic lockers, specialty products and storage solutions. Our warehouses are filled with quality products and most items ship within 1-2 business days from the date an order is received. Whether you are located around the block or around the world, you can count on Salsbury Industries to deliver quality products on time from our distribution facilities in Los Angeles, CA and Columbus, OH.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

Buy Locker

×