Bank size: It does not necessarily refer to the total number of compartments, but rather the number of compartments wide the entire cabinet is. So a bank of three may contain six lockers, for example, if they are two-tier lockers. In short, the total number of lockers is the bank size multiplied by the number of tiers. Sometimes the term "bay" is used instead of "bank", although "bank" appears to be the more standard term; on other occasions, "bay" refers to a single locker width within a bank, including all tiers of locker directly on top of each other.


When looking at Pallet Racks as a storage solution, consider the needs along with the physical requirements of your business before investing in a complete pallet racking system. Industrial Storage Rack configurations should consider accessibility to individual loads (selectivity), handling time, the efficiency of space utilization (storage density), order fulfillment speed, along with acquisition expenses.
Est. in 1936, Salsbury Industries is home to both our lockers.com & mailboxes.com websites. The industry leader in the manufacturing & distributing of quality metal lockers, wood lockers, plastic lockers & storage solutions. Salsbury Industries manufacturing facilities are vertically integrated. Headquartered just minutes from downtown Los Angeles.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.

With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications and has matching finish on all sides and top for a finished look. Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel brackets and fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria.
All countries United Kingdom Italy United States Spain Netherlands France Canada Australia Hungary Czech Republic Germany Brazil Portugal Slovakia Ireland Argentina Croatia Bulgaria Denmark Poland Greece Serbia Thailand Philippines Nepal Mexico Russia Finland Belgium Malaysia Lithuania Malta South Korea Norway Estonia Hong Kong Japan Switzerland Sweden Austria Latvia Slovenia Singapore Romania Ukraine
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
Foot Locker's investment in Rockets of Awesome is part of the online retailer's $19.5 million Series C funding round. Now, Rockets of Awesome — which hasn't had much of a bricks-and-mortar presence other than a handful of pop-up shops — will be opening ministores within Kids Foot Locker locations across the country. Rockets of Awesome is also going to begin selling on Foot Locker's children's website.
Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.

This is a first come first serve system and lockers get bought up very quickly. Lockers must be cleaned out BEFORE FINALS WEEK ENDS. Locks will be changed after the due date. Failure to comply will result in your belongings being bagged up and kept for one semester, after which your belongings will be donated. A $5.00 fee will be assessed for a lost lock and must be paid at the Cashier’s Office.
Stored my luggage for several hours at Lugden. Great location just across the street from Union Station. Spoke with the owner and he said he owns the parking spot so they are always there during the day. Prices were reasonable and I felt comfortable storing my bags there while I explored Denver. The owner was nice and gave me coupons for some local businesses.
I'm going to Denver for the first time in a few weeks. I'll be travelling lite with a backpack and smaller "purse" size bag. Is there a locker in downtown area where I can store the knapsack for a few hours while I walk around downtown. I know some cities have lockers at the greyhound or union station but I can't find that information anywhere on the web.

Wilderness Exchange is within walking distance of Union and they require you leave a bag with them when you go into the store, they may be willing to stash your bag for a few hours. No guarantee on that, but an option if you can't find anything else. They are only open 10am-6pm on Sundays, so you may have to wait around a bit or pick it up early depending on when you get there and will be leaving.


When it comes to adventurous living, Denver ranks as one of the most outdoorsy cities in the United States. Whether it’s hiking up mountains or skating down the winding mountain-roads in nearby Boulder, Denver is a great place to be outdoors and enjoy that adrenalin rush. So naturally, if you have a long stopover in Denver, or quite a bit of time on your hands before that big conference, you’ll need to find Denver luggage storage so you can make the best of it.
×