“In many cases, they’re [homeless] building things like little shanty towns, bringing furniture in and camping out. There have been incidents at night where there have been brawls or loud arguments happening at 3, 4 a.m. waking people up. I do know that several neighbors have complained that they have found human waste in their yards,” said Romero. 

Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
This is a first come first serve system and lockers get bought up very quickly. Lockers must be cleaned out BEFORE FINALS WEEK ENDS. Locks will be changed after the due date. Failure to comply will result in your belongings being bagged up and kept for one semester, after which your belongings will be donated. A $5.00 fee will be assessed for a lost lock and must be paid at the Cashier’s Office.
Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.

Buy Denver Lockers


To use an Amazon Locker as your shipping destination, find a Locker and add it to your Amazon address book. Then, during checkout, select the Locker as your shipping address. Once your package has been delivered, we will email you a unique 6 digit code. Simply visit your selected Locker and enter the code on the Locker's touchscreen, then remove your package after the Locker's door opens. Learn more about picking up a package from an Amazon Locker here.
The storage lockers were a “pilot,” the kind of small test that city government frequently uses to test a new or controversial idea. The city offered up the lockers for individuals to use for months-long stretches. At the time, city officials warned that “misuse of the lockers, vandalism, or other unanticipated results,” could force them to cancel the project.
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
PROTECT THIS CARD LIKE CASH. GiftCard may be applied towards any purchase at Foot Locker, Kids Foot Locker or Lady Foot Locker stores in the US or online at footlocker.com, kidsfootlocker.com or ladyfootlocker.com. Card may not be exchanged for cash & will not be replaced if lost or stolen. No variance from the terms & conditions will be allowed except where legally required. For card balance call 1.877.254.3333 (Toll Free). GiftCard is issued by Foot Locker Card Services LLC. STORE LOCATOR CALL: Foot Locker 1.800.991.6681; Lady Foot Locker 1.800.877.5239; Kids Foot Locker 1.800.991.6684

Plastic Lockers are ideal for high-humidity applications, as these virtually maintenance-free lockers will never rust, rot, corrode or fade. These lockers are available in multiple configurations and are backed by a 15-year warranty. Optional configurations like Lattice Lockers, or doors with other non-standard vents can be obtained through ASI Storage Solutions. Please consult our customer service team to be advised on changes in pricing and delivery lead times for all non-standard items.
The storage lockers were a “pilot,” the kind of small test that city government frequently uses to test a new or controversial idea. The city offered up the lockers for individuals to use for months-long stretches. At the time, city officials warned that “misuse of the lockers, vandalism, or other unanticipated results,” could force them to cancel the project.
If you want lockers, welcome to the place that knows lockers! You will find we are a trusted, family-owned business that has become the largest vendor of lockers in North America and beyond. Here you can find all locker sizes, shapes and colors for schools, businesses and even for homes. Our guests tell us that they came to SchoolLockers.com because we have helped their friends and business associates choose the best lockers for their needs. When you take that wealth of experience plus our convenient and secure online shopping and combine those with the lowest shipping prices possible, you see why we are the locker authority. Give our friendly and knowledgeable staff a call, because we are always available and just a phone call away. 

Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.

Buy Denver Lockers

×