Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Lockers are only available to currently enrolled students and current employees.  The University is not responsible for the contents of any locker.  Users must use the lock provided by Roosevelt University.  No stickers or posters are allowed on the lockers.  No dangerous or illegal items may be stored in lockers at any time.  Items causing unpleasant odors are not allowed.  Lockers must be able to be fully closed at all times.   Roosevelt University reserves the right to open lockers at its discretion at any time and to remove any items it believes compromises the safety or environmental quality of Roosevelt University.   Roosevelt University reserves the rights to charge for damages to the locker and may cancel this rental agreement at any time for any reason.
Your locker is your home away from home - but only for a few moments at a time. Organizing your locker to be able to quickly grab your books, binders, and supplies can make sure you make it between classes on time, leave more time for hanging out with friends, and keep you going through the day. Locker shelves are the most basic of locker organizers - they double your space, they keep too much from piling up at the bottom, and make it easy to see all of your things. Magnetic bins for your locker door can add storage for smaller items, extra pens and other pocketables. And decorations and locker lights can help you give your locker a style all its own.
Your industrial-style loft melds hardwood floors, exposed duct work, and stainless steel appliances beautifully, but the struggle is creating a cohesive design with your decor. Mix new and old, cold metal and warm woods to fit this style, and start with a signature piece, such as used school lockers. These lockers are industrial in nature, and whether the metal is flawlessly finished in a bright color or boasts naturally-occurring rust from years of neglect, they fit in with this design style. Used school lockers also offer a functional storage space in various sizes, with lockers as small as 12 inches by 12 inches, and as large as 30 inches by 66 inches. Once you decide on your lockers, keep your storage solution as functional as possible with a school locker organizer to make the most of the space with hanging shelves or small magnetic holders. School locker magnets can be that extra little space you need to hold pens, business cards, reminder lists, and other small items. Finding the right design pieces for your industrial-style loft can be somewhat difficult, but the sellers on eBay have you covered with a large selection of vintage items like school lockers.
In the States everybody is so concerned about liability.... We tried to store at Hertz (where we dropped the rental); no storage facility, no luck. Try a hotel; I tried several, if you are not a guest then they are not allowed. I tried the Information Centre; no luck, they had some bad experiences.... in the past. But they could not realy help me any further. One advise: try the Greyhound Bus Center. And yes! there you can store your luggage. Even my somewhat bigger suitcase. The lockers are somewhat small but high and deep enough. First 3 hours is to be paid for; $ 3 and after that a dollar for an extra hour.

Our Promise Our staff is not only dedicated to providing you with cheap, second hand lockers, we are also dedicated to providing you with friendly customer service from the beginning of your buying process all the way to its delivery. We guarantee we have the best used lockers for sale and our projects speak to that. We have multiple satisfied clients whether we were installing athletic sport lockers for a high school or wooden cube lockers for ski lodges. We value building that trust with our clients to where they know we'll deliver quality products and installs.
Wilderness Exchange is within walking distance of Union and they require you leave a bag with them when you go into the store, they may be willing to stash your bag for a few hours. No guarantee on that, but an option if you can't find anything else. They are only open 10am-6pm on Sundays, so you may have to wait around a bit or pick it up early depending on when you get there and will be leaving.
18 in. Wide Metal Locker offer ample space 18 in. Wide Metal Locker offer ample space for personal storage need. Ideal for government agencies law enforcements locker rooms employee changing rooms gyms and many other applications. These spacious lockers are six (6) feet high (add 6 in. for legs). Each compartment door include a lift up handle and ...  More + Product Details Close

Material: steel is the traditional material; but wood, plastic, or laminate are sometimes used. Plastic or laminate lockers are sometimes advocated in environments, such as near swimming pools, where moisture accumulation may cause steel lockers to rust over time. They can also be used in external applications where internal space is not available.
Some schools in the United States have been reported to have abolished the use of lockers. Security concerns are cited as the reason for this, with the concern being that lockers may be used to store contraband items such as weapons or drugs or pornographic material.[1] There has been some controversy over in what circumstances school authorities or law-enforcement officials are permitted to search lockers, with or without informing the users, or with or without the users being present at the time of the search, and it has been considered a civil liberties issue, particularly in the U.S.
But now, the city has announced it will spend $160,000 on two pilot projects to provide 210 more storage lockers for those experiencing homelessness. Some service providers say the announcement is a move in the right direction for the city, which has found itself the subject of harsh criticism and even a federal class-action lawsuit over the enforcement of its camping ban.
Storage Auctions in Alabama | Storage Auctions in Arizona | Storage Auctions in California | Storage Auctions in Florida | Storage Auctions in Colorado | Storage Auctions in Delaware | Storage Auctions in Florida | Storage Auctions in Georgia | Storage Auctions in Illinois | Storage Auctions in Kansas | Storage Auctions in Kentucky | Storage Auctions in Maryland | Storage Auctions in Massachusetts | Storage Auctions in Mississippi | Storage Auctions in Missouri | Storage Auctions in Nevada | Storage Auctions in New Hampshire | Storage Auctions in New Jersey | Storage Auctions in New Mexico | Storage Auctions in New York | Storage Auctions in North Carolina | Storage Auctions in Ohio | Storage Auctions in Oklahoma | Storage Auctions in Pennsylvania | Storage Auctions in South Carolina | Storage Auctions in Texas | Storage Auctions in Vermont| Storage Auctions in Virginia
Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.
Plastic Lockers are ideal for high-humidity applications, as these virtually maintenance-free lockers will never rust, rot, corrode or fade. These lockers are available in multiple configurations and are backed by a 15-year warranty. Optional configurations like Lattice Lockers, or doors with other non-standard vents can be obtained through ASI Storage Solutions. Please consult our customer service team to be advised on changes in pricing and delivery lead times for all non-standard items.

Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria. The superior construction and materials used in the locker system make it adaptable to all types of facilities, including health clubs, country clubs and executive washrooms. Phenolic lockers can easily be customized. Please consult with ASI Storage for customization or options not shown in the catalog. Any customization is subject to a change in price and delivery lead times. Now available in color-thru phenolic colors upon request.

Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

Salsbury Industries is proficient at shipping a wide selection of metal lockers, wood lockers, plastic lockers, specialty products and storage solutions. Our warehouses are filled with quality products and most items ship within 1-2 business days from the date an order is received. Whether you are located around the block or around the world, you can count on Salsbury Industries to deliver quality products on time from our distribution facilities in Los Angeles, CA and Columbus, OH.
Categories: English words suffixed with -erEnglish terms derived from Old EnglishEnglish terms derived from Proto-GermanicEnglish lemmasEnglish nounsEnglish countable nounsEnglish terms with rare sensesen:AutomotiveEnglish terms with historical sensesGerman terms with audio linksGerman lemmasGerman adjectivesGerman non-lemma formsGerman verb formsSpanish lemmasSpanish nouns

Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.


Don't take chances with a small storage company that doesn't have the nationwide resources like CubeSmart to ensure that customer service is prioritized. We're in it for the long-haul and we recognize that your satisfaction is instrumental to our success. We think you should expect more from storage and our locations in and around Denver are ready to exceed your expectations.
Our Promise Our staff is not only dedicated to providing you with cheap, second hand lockers, we are also dedicated to providing you with friendly customer service from the beginning of your buying process all the way to its delivery. We guarantee we have the best used lockers for sale and our projects speak to that. We have multiple satisfied clients whether we were installing athletic sport lockers for a high school or wooden cube lockers for ski lodges. We value building that trust with our clients to where they know we'll deliver quality products and installs.
In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes.[1] However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Available in single-, double- or triple-tier configurations, this collection features 14 gauge doors with 16 gauge full-height reinforcement channels, frame-secured 11 gauge frame hooks with protruding padlock hasps, and a maintenance-free, single-point latching system.
Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.
There is an honest way for supporters of a nationwide popular vote to eject the Electoral College, and that is to take away its accreditation by way of a constitutional amendment to repeal it. But that would take 2/3 of both houses of Congress and 3/4 of the states, and apparently that task gives opponents of the Electoral College the vapors.Much easier, they think, to perform an end-run on the US Constitution's amendment process through the National Popular Vote Interstate Compact.Interstate compacts are for regional cooperation in governing the use of river water, for example, or in agreeing that if a nurse in one state passes that state's licensing requirements, other states will accept that nurse's license to practice.Interstate compacts are not for the purpose of subverting the US Constitution.I hate the Electoral College, it's antiquated and obsolete, in my opinion. But I don't support the NPVIC.If people think our politics are divisive now, just wait to see what happens if the NPVIC is adopted by 270 electoral votes' worth of states.So, call Governor Polis' office at 303-866-2471 and tell him to veto senate bill 19-042, the National Popular Vote Interstate Compact. Be sure to mention the bill number! I do, however, like the idea of proportional electoral votes from each state. Winner-take-all is nowhere mentioned in any form in the US Constitution. Maine and Nebraska have the right idea. 
×