Wilderness Exchange is within walking distance of Union and they require you leave a bag with them when you go into the store, they may be willing to stash your bag for a few hours. No guarantee on that, but an option if you can't find anything else. They are only open 10am-6pm on Sundays, so you may have to wait around a bit or pick it up early depending on when you get there and will be leaving.
From our base in Denver, CO, Shelving Rack & Lockers, Inc. has been providing quality products such as pallet storage racks, industrial shelving, lockers, and allied products to customers in Colorado and nationwide since 1989. We carry a full line of industrial storage equipment from quality manufacturers. Our experienced staff can assist you in every aspect of your storage needs, from design through installation.
The visually appealing and very durable Traditional Collection is our most widely distributed locker line. Offering the most value for typical locker applications, this collection is available in a full range of spacious sizes, from single- to six-tier configurations, as well as two-person, 16-person and wall-mounted. The addition of our new 2 person Z-Locker completes the Traditional collection.
This e-Gift Card may be applied towards any purchase online at footlocker.com, kidsfootlocker.com, or ladyfootlocker.com. To redeem this e-Gift Card online, use the 16-digit number and the PIN provided. Coupon/discount codes may be used when redeeming a Gift Card or Gift Certificate. This e-Gift Card may be applied towards any purchase at any Foot Locker, Kids Foot Locker, or Lady Foot Locker store in the U.S. To redeem this e-Gift Card in stores, present your phone with the e-Gift Card code at the time of purchase. Coupon/discount codes may be used when redeeming a Gift Card or Gift Certificate.

Bank size: It does not necessarily refer to the total number of compartments, but rather the number of compartments wide the entire cabinet is. So a bank of three may contain six lockers, for example, if they are two-tier lockers. In short, the total number of lockers is the bank size multiplied by the number of tiers. Sometimes the term "bay" is used instead of "bank", although "bank" appears to be the more standard term; on other occasions, "bay" refers to a single locker width within a bank, including all tiers of locker directly on top of each other.

Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
Editor's note: Contact7 seeks out audience tips and feedback to help people in need, resolve problems and hold the powerful accountable. If you know of a community need our call center could address, or have a story idea for our investigative team to pursue, please email us at [email protected] or call (720) 462-7777. Find more Contact7 stories here .
The Pro Collection is specifically designed for applications that require easy access to uniforms and equipment. Select the configuration that best suits your needs by adding a lockable security box and/or a footlocker with a reinforced top that doubles as a seat. The open front and perforated sides allow for full ventilation, with a large dedicated storage area.

Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Material: steel is the traditional material; but wood, plastic, or laminate are sometimes used. Plastic or laminate lockers are sometimes advocated in environments, such as near swimming pools, where moisture accumulation may cause steel lockers to rust over time. They can also be used in external applications where internal space is not available.
Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.
Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.

With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications and has matching finish on all sides and top for a finished look. Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel brackets and fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria.
Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Editor's note: Contact7 seeks out audience tips and feedback to help people in need, resolve problems and hold the powerful accountable. If you know of a community need our call center could address, or have a story idea for our investigative team to pursue, please email us at [email protected] or call (720) 462-7777. Find more Contact7 stories here .
Looking out for a Lockers, Shelving, Racks organization in Denver, Colorado? AIS Industrial and Construction Supply (Shelving Division) provides Sales, Assembly, Delivery, and Installation of Lockers, Shelving, Racks and Cabinets to Warehouse Storage Solutions – Business Storage Solutions in Arvada, Aurora, Broomfield, Commerce City, Dupont, Eastlake, Englewood, Golden, Henderson, Idledale, Littleton, Westminster, and Wheat Ridge. AIS Industrial and Construction Supply (Shelving Division) have been in business since 1941.
Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.

They are usually intended for use in public places, and intended for the short- or long-term private use of individuals for storing clothing or other personal items. Users may rent a locker for a single use or for a period of time for repeated use. Some lockers are offered as a free service to people partaking of certain activities that require the safekeeping of personal items.
Constructed of 16-Gauge steel Salsbury 61000 series single Constructed of 16-Gauge steel Salsbury 61000 series single tier metal lockers offer privacy and space for personal storage needs. Single tier metal lockers are available in a gray tan or blue powder coated finish and as unassembled or assembled units. These durable lockers are available in heights of 5 ft. ...  More + Product Details Close
In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes.[1] However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.

The visually appealing and very durable Traditional Collection is our most widely distributed locker line. Offering the most value for typical locker applications, this collection is available in a full range of spacious sizes, from single- to six-tier configurations, as well as two-person, 16-person and wall-mounted. The addition of our new 2 person Z-Locker completes the Traditional collection.


In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes.[1] However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.

Buy Lockers For Sale

×