With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications and has matching finish on all sides and top for a finished look. Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel brackets and fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
Rebecca, I remember a previous post that a visitor found storage at the bus station, so I called to see if still available, and it is. Lockers are $3 for the first hour and $1 per hour after that. It's difficult to find storage short term because of security/liability, esp. since 9/11. If you are staying at a hotel, they will often keep your luggage for you short term.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.

Discover how easy it is to take your bike along for the ride. All buses are equipped with bike racks on the front of the bus, except for the 16th Street Free MallRide and Free MetroRide. Our easy-to-use bike racks can hold two bikes and are available on a first-come, first-served basis. Our bike racks can hold adult and child bikes and can accommodate tires up to 2.35 inches in width. RTD is not responsible for lost or stolen bikes or damage to bikes due to improper loading.


Unlike our competitors, we make it a point to refurbish all of our used lockers so that we can deliver a quality product for the cheaper price you want. With warehouses on the East and West coasts, we're able to store several lockers so that we can bring you the best selection possible. Find the shape, color, and size that works best for you with just a few clicks. Our site is simple to navigate, easing the process of buying so that you can spend more time on the things that matter to you. Need help? We're just a call or an email away and we're always happy to assist you at any stage of your buying process.
Storage Auctions in Alabama | Storage Auctions in Arizona | Storage Auctions in California | Storage Auctions in Florida | Storage Auctions in Colorado | Storage Auctions in Delaware | Storage Auctions in Florida | Storage Auctions in Georgia | Storage Auctions in Illinois | Storage Auctions in Kansas | Storage Auctions in Kentucky | Storage Auctions in Maryland | Storage Auctions in Massachusetts | Storage Auctions in Mississippi | Storage Auctions in Missouri | Storage Auctions in Nevada | Storage Auctions in New Hampshire | Storage Auctions in New Jersey | Storage Auctions in New Mexico | Storage Auctions in New York | Storage Auctions in North Carolina | Storage Auctions in Ohio | Storage Auctions in Oklahoma | Storage Auctions in Pennsylvania | Storage Auctions in South Carolina | Storage Auctions in Texas | Storage Auctions in Vermont| Storage Auctions in Virginia
The Pro Collection is specifically designed for applications that require easy access to uniforms and equipment. Select the configuration that best suits your needs by adding a lockable security box and/or a footlocker with a reinforced top that doubles as a seat. The open front and perforated sides allow for full ventilation, with a large dedicated storage area.
18 in. Wide Metal Locker offer ample space 18 in. Wide Metal Locker offer ample space for personal storage need. Ideal for government agencies law enforcements locker rooms employee changing rooms gyms and many other applications. These spacious lockers are six (6) feet high (add 6 in. for legs). Each compartment door include a lift up handle and ...  More + Product Details Close
If you are paid through the fall semester, you must clean out your locker during finals week of the fall semester. If you are paid for fall and spring, you have to clean out your locker during finals week of the spring semester, but not during winter break between semesters. If you are paid through summer, you have to clean out your locker two weeks before school starts. Exception: If you renew your locker, you must clean your locker out by the end of the semester that you paid through, unless of course, it is through summer, and then you will need to clean out two weeks before the fall semester starts.
Categories: English words suffixed with -erEnglish terms derived from Old EnglishEnglish terms derived from Proto-GermanicEnglish lemmasEnglish nounsEnglish countable nounsEnglish terms with rare sensesen:AutomotiveEnglish terms with historical sensesGerman terms with audio linksGerman lemmasGerman adjectivesGerman non-lemma formsGerman verb formsSpanish lemmasSpanish nouns
Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria. The superior construction and materials used in the locker system make it adaptable to all types of facilities, including health clubs, country clubs and executive washrooms. Phenolic lockers can easily be customized. Please consult with ASI Storage for customization or options not shown in the catalog. Any customization is subject to a change in price and delivery lead times. Now available in color-thru phenolic colors upon request.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Plastic Lockers are ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot or corrode. These lockers are available in multiple configurations and are backed by a 15-year warranty.
Looking out for a Lockers, Shelving, Racks organization in Denver, Colorado? AIS Industrial and Construction Supply (Shelving Division) provides Sales, Assembly, Delivery, and Installation of Lockers, Shelving, Racks and Cabinets to Warehouse Storage Solutions – Business Storage Solutions in Arvada, Aurora, Broomfield, Commerce City, Dupont, Eastlake, Englewood, Golden, Henderson, Idledale, Littleton, Westminster, and Wheat Ridge. AIS Industrial and Construction Supply (Shelving Division) have been in business since 1941.
Locker doors usually have some kind of ventilation to provide for the flow of air to aid in cleanliness. These vents usually take the form of a series of horizontal angled slats at the top and bottom of the door, although sometimes parallel rows of small square or rectangular holes are found instead, running up and down the door. Less often, the side or rear walls may also have similar ventilation.
Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.
It's also important to note that Style Scores work as a complement to the Zacks Rank, our stock rating system that has an impressive track record of outperformance. Foot Locker currently has a Zacks Rank of #2 (Buy). Our research shows that stocks rated Zacks Rank #1 (Strong Buy) and #2 (Buy) and Style Scores of A or B outperform the market over the following one-month period.

There are plenty of convenient places to store your luggage in Denver, from downtown to Lincoln street to Capitol Hill and Commons park. The cost is just US$6 per day, and check in time is just 3 minutes. So basically, in the same time it took to make that instant cup of Ramen before rushing to the airport, you can be in and out the door with no luggage to weigh you down.
They are usually intended for use in public places, and intended for the short- or long-term private use of individuals for storing clothing or other personal items. Users may rent a locker for a single use or for a period of time for repeated use. Some lockers are offered as a free service to people partaking of certain activities that require the safekeeping of personal items.

Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications and has matching finish on all sides and top for a finished look. Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel brackets and fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria.
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
Just so you know I have tried to call and email and left multiple messages trying to find some middle-ground and give him an opportunity to make amends as I know how determinantal negative online reviews can be for a business but they have not returned a single call or email and know that we are back in FL and she has lost/had stolen many, many expensive and sentimental things we have no choice but to share our story so that know on hopefully ends up having a similar experience.  
Categories: English words suffixed with -erEnglish terms derived from Old EnglishEnglish terms derived from Proto-GermanicEnglish lemmasEnglish nounsEnglish countable nounsEnglish terms with rare sensesen:AutomotiveEnglish terms with historical sensesGerman terms with audio linksGerman lemmasGerman adjectivesGerman non-lemma formsGerman verb formsSpanish lemmasSpanish nouns
Bank size: It does not necessarily refer to the total number of compartments, but rather the number of compartments wide the entire cabinet is. So a bank of three may contain six lockers, for example, if they are two-tier lockers. In short, the total number of lockers is the bank size multiplied by the number of tiers. Sometimes the term "bay" is used instead of "bank", although "bank" appears to be the more standard term; on other occasions, "bay" refers to a single locker width within a bank, including all tiers of locker directly on top of each other. 

Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria. The superior construction and materials used in the locker system make it adaptable to all types of facilities, including health clubs, country clubs and executive washrooms. Phenolic lockers can easily be customized. Please consult with ASI Storage for customization or options not shown in the catalog. Any customization is subject to a change in price and delivery lead times. Now available in color-thru phenolic colors upon request.

Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.

Buy Denver Lockers

×