Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.


While home shelving should never be used for heavy-duty applications, you may desire to use heavy duty metal shelving at home, in your garage or shed, where you may need to store large or heavy products or materials. We use world class vendors like Penco, Rivet Rite® and Clipper Shelving® to give you a clue about the quality of our Heavy Duty Industrial Steel Shelves for warehouse or storage requirements.

At Shelving Rack & Lockers, Inc. we are always doing our part to recycle good industrial storage equipment. We are continually looking for quality used products that are in usable and sturdy condition. Doing so allows us to give you great products as well as incredible savings. Additionally, it helps us do our part to keep unnecessary items out of our landfills, making our environment more green.


Momentum investing is all about the idea of following a stock's recent trend, which can be in either direction. In the 'long' context, investors will essentially be "buying high, but hoping to sell even higher." And for investors following this methodology, taking advantage of trends in a stock's price is key; once a stock establishes a course, it is more than likely to continue moving in that direction. The goal is that once a stock heads down a fixed path, it will lead to timely and profitable trades.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
From our base in Denver, CO, Shelving Rack & Lockers, Inc. has been providing quality products such as pallet storage racks, industrial shelving, lockers, and allied products to customers in Colorado and nationwide since 1989. We carry a full line of industrial storage equipment from quality manufacturers. Our experienced staff can assist you in every aspect of your storage needs, from design through installation.

In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes.[1] However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.
Est. in 1936, Salsbury Industries is home to both our lockers.com & mailboxes.com websites. The industry leader in the manufacturing & distributing of quality metal lockers, wood lockers, plastic lockers & storage solutions. Salsbury Industries manufacturing facilities are vertically integrated. Headquartered just minutes from downtown Los Angeles.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Other advocates of lockerless schools also cite reasons such as reducing noise by eliminating the clang of dozens of locker doors,[1] or creating a more appealing environment aesthetically. It has also been claimed that removing lockers provides good training for students by forcing them to be more efficient in managing their books, and taking the time to plan what books they will need, and carrying only those ones.

Now that you’ve scored yourself some Denver luggage storage, the next thing on the list is finding things to do and places to explore. If it’s a Monday, a lot of the amazing indoor attractions and restaurants will be closed, but there is still plenty to do on any day of the week! See a concert at the Red Rock Amphitheatre, marvel at the beauty of the Cathedral of the Immaculate Conception or take a hike in the famous Rocky Mountains. You won’t regret it!
If you are paid through the fall semester, you must clean out your locker during finals week of the fall semester. If you are paid for fall and spring, you have to clean out your locker during finals week of the spring semester, but not during winter break between semesters. If you are paid through summer, you have to clean out your locker two weeks before school starts. Exception: If you renew your locker, you must clean your locker out by the end of the semester that you paid through, unless of course, it is through summer, and then you will need to clean out two weeks before the fall semester starts.
“In many cases, they’re [homeless] building things like little shanty towns, bringing furniture in and camping out. There have been incidents at night where there have been brawls or loud arguments happening at 3, 4 a.m. waking people up. I do know that several neighbors have complained that they have found human waste in their yards,” said Romero.

Budget Conscious Used lockers are a great way for you to pay for lockers at a cheap price without having to sacrifice quality. You also don't have to sacrifice variety which is why we offer everything from antique lockers to sports lockers. Tall or small, we ensure that all used lockers are priced fairly so that you get the best sale possible. Not only do we provide the best used lockers, we also offer storage cabinets.
There is a luggage storage service a short one minute walk from Union Station in downtown Denver - LUGDEN. You can make a reservation online - lugden.com, call - (303) 747-5600, or show up as a walk-in. They offer hourly, day, overnight and weekly bag storage. Great place to store your luggage if you're on a layover from Denver International Airport, or going to a concert, or headed to a Rockies game at Coors field and want to enjoy yourself without having to lug your bags around.
Investors should also pay attention to FL's average 20-day trading volume. Volume is a useful item in many ways, and the 20-day average establishes a good price-to-volume baseline; a rising stock with above average volume is generally a bullish sign, whereas a declining stock on above average volume is typically bearish. FL is currently averaging 2,544,457 shares for the last 20 days.
Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Available in single-, double- or triple-tier configurations, this collection features 14 gauge doors with 16 gauge full-height reinforcement channels, frame-secured 11 gauge frame hooks with protruding padlock hasps, and a maintenance-free, single-point latching system.
Discover how easy it is to take your bike along for the ride. All buses are equipped with bike racks on the front of the bus, except for the 16th Street Free MallRide and Free MetroRide. Our easy-to-use bike racks can hold two bikes and are available on a first-come, first-served basis. Our bike racks can hold adult and child bikes and can accommodate tires up to 2.35 inches in width. RTD is not responsible for lost or stolen bikes or damage to bikes due to improper loading.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
Bicycle lockers are usually in outdoor locations near railway stations and the like where people may want to store bicycles securely. They are often banked together, with individual lockers shaped like an isosceles triangle for efficient and compact storage of a bicycle. This triangular shape permits the lockers to be grouped either in a radial pattern (with the sharpest points of the lockers together), or in a row in alternating orientations.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.

Categories: English words suffixed with -erEnglish terms derived from Old EnglishEnglish terms derived from Proto-GermanicEnglish lemmasEnglish nounsEnglish countable nounsEnglish terms with rare sensesen:AutomotiveEnglish terms with historical sensesGerman terms with audio linksGerman lemmasGerman adjectivesGerman non-lemma formsGerman verb formsSpanish lemmasSpanish nouns
Public lockers are available on all floors of the Anderson Academic Commons for short-term storage needs.  Lockers are available on a first-come, first-served basis.  To use a locker, enter a 4-digit personalized code for locking and unlocking.  Directions for setting the 4-digit code are located inside each locker.  Lockers unlock automatically after 24 hours.

There is an honest way for supporters of a nationwide popular vote to eject the Electoral College, and that is to take away its accreditation by way of a constitutional amendment to repeal it. But that would take 2/3 of both houses of Congress and 3/4 of the states, and apparently that task gives opponents of the Electoral College the vapors.Much easier, they think, to perform an end-run on the US Constitution's amendment process through the National Popular Vote Interstate Compact.Interstate compacts are for regional cooperation in governing the use of river water, for example, or in agreeing that if a nurse in one state passes that state's licensing requirements, other states will accept that nurse's license to practice.Interstate compacts are not for the purpose of subverting the US Constitution.I hate the Electoral College, it's antiquated and obsolete, in my opinion. But I don't support the NPVIC.If people think our politics are divisive now, just wait to see what happens if the NPVIC is adopted by 270 electoral votes' worth of states.So, call Governor Polis' office at 303-866-2471 and tell him to veto senate bill 19-042, the National Popular Vote Interstate Compact. Be sure to mention the bill number! I do, however, like the idea of proportional electoral votes from each state. Winner-take-all is nowhere mentioned in any form in the US Constitution. Maine and Nebraska have the right idea.
Quality Refurbishing Many of the old, wholesale lockers we have in stock have minimal damage and some are near brand-new condition. For lockers that need repairs, our unique multiple point inspection and repair process helps to refine these lockers to a high quality, salvaged state. We know you want to buy quality lockers and we will not be shipping out lockers that are not fully functional. To get the most out of your refurbished locker, we also offer tips on alternative ways you can utilize them. Don't want to have the same old wall locker look? Use one as a laundry room locker or a console table.
We have metal lockers for sale, yes, metal lockers that are designed for many applications like first responders of all types, school corridor lockers, employee lockers, high school lockers, Athletic lockers Footlockers, and Stadium® lockers that are ideally suited for athletic team rooms to store helmets, uniforms and gear for many different sports.
Unlike our competitors, we make it a point to refurbish all of our used lockers so that we can deliver a quality product for the cheaper price you want. With warehouses on the East and West coasts, we're able to store several lockers so that we can bring you the best selection possible. Find the shape, color, and size that works best for you with just a few clicks. Our site is simple to navigate, easing the process of buying so that you can spend more time on the things that matter to you. Need help? We're just a call or an email away and we're always happy to assist you at any stage of your buying process.
Editor's note: Contact7 seeks out audience tips and feedback to help people in need, resolve problems and hold the powerful accountable. If you know of a community need our call center could address, or have a story idea for our investigative team to pursue, please email us at [email protected] or call (720) 462-7777. Find more Contact7 stories here .
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
In many ways, Foot Locker is taking an approach like that of Walmart, which has been acquiring online brands including Art.com, Jet.com and clothing retailers Bonobos and Modcloth. These acquisitions give Walmart access to customer data, but more importantly teams of young and hungry retail entrepreneurs. That's how it got Jet.com founder Marc Lore, who now lead's Walmart's U.S. e-commerce business.
Looking out for a Lockers, Shelving, Racks organization in Denver, Colorado? AIS Industrial and Construction Supply (Shelving Division) provides Sales, Assembly, Delivery, and Installation of Lockers, Shelving, Racks and Cabinets to Warehouse Storage Solutions – Business Storage Solutions in Arvada, Aurora, Broomfield, Commerce City, Dupont, Eastlake, Englewood, Golden, Henderson, Idledale, Littleton, Westminster, and Wheat Ridge. AIS Industrial and Construction Supply (Shelving Division) have been in business since 1941.
The Pro Collection is specifically designed for applications that require easy access to uniforms and equipment. Select the configuration that best suits your needs by adding a lockable security box and/or a footlocker with a reinforced top that doubles as a seat. The open front and perforated sides allow for full ventilation, with a large dedicated storage area.
The visually appealing and very durable Traditional Collection is our most widely distributed locker line. Offering the most value for typical locker applications, this collection is available in a full range of spacious sizes, from single- to six-tier configurations, as well as two-person, 16-person and wall-mounted. The addition of our new 2 person Z-Locker completes the Traditional collection. 
×