When looking at Pallet Racks as a storage solution, consider the needs along with the physical requirements of your business before investing in a complete pallet racking system. Industrial Storage Rack configurations should consider accessibility to individual loads (selectivity), handling time, the efficiency of space utilization (storage density), order fulfillment speed, along with acquisition expenses.
Bank size: It does not necessarily refer to the total number of compartments, but rather the number of compartments wide the entire cabinet is. So a bank of three may contain six lockers, for example, if they are two-tier lockers. In short, the total number of lockers is the bank size multiplied by the number of tiers. Sometimes the term "bay" is used instead of "bank", although "bank" appears to be the more standard term; on other occasions, "bay" refers to a single locker width within a bank, including all tiers of locker directly on top of each other.
Locker doors usually have some kind of ventilation to provide for the flow of air to aid in cleanliness. These vents usually take the form of a series of horizontal angled slats at the top and bottom of the door, although sometimes parallel rows of small square or rectangular holes are found instead, running up and down the door. Less often, the side or rear walls may also have similar ventilation.
This is a first come first serve system and lockers get bought up very quickly. Lockers must be cleaned out BEFORE FINALS WEEK ENDS. Locks will be changed after the due date. Failure to comply will result in your belongings being bagged up and kept for one semester, after which your belongings will be donated. A $5.00 fee will be assessed for a lost lock and must be paid at the Cashier’s Office.
Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
At Shelving Rack & Lockers, Inc. we are always doing our part to recycle good industrial storage equipment. We are continually looking for quality used products that are in usable and sturdy condition. Doing so allows us to give you great products as well as incredible savings. Additionally, it helps us do our part to keep unnecessary items out of our landfills, making our environment more green.