The storage lockers were a “pilot,” the kind of small test that city government frequently uses to test a new or controversial idea. The city offered up the lockers for individuals to use for months-long stretches. At the time, city officials warned that “misuse of the lockers, vandalism, or other unanticipated results,” could force them to cancel the project.
Categories: English words suffixed with -erEnglish terms derived from Old EnglishEnglish terms derived from Proto-GermanicEnglish lemmasEnglish nounsEnglish countable nounsEnglish terms with rare sensesen:AutomotiveEnglish terms with historical sensesGerman terms with audio linksGerman lemmasGerman adjectivesGerman non-lemma formsGerman verb formsSpanish lemmasSpanish nouns
They are usually intended for use in public places, and intended for the short- or long-term private use of individuals for storing clothing or other personal items. Users may rent a locker for a single use or for a period of time for repeated use. Some lockers are offered as a free service to people partaking of certain activities that require the safekeeping of personal items.
Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.

Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.


Investors should also pay attention to FL's average 20-day trading volume. Volume is a useful item in many ways, and the 20-day average establishes a good price-to-volume baseline; a rising stock with above average volume is generally a bullish sign, whereas a declining stock on above average volume is typically bearish. FL is currently averaging 2,544,457 shares for the last 20 days.
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.

Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

Now that you’ve scored yourself some Denver luggage storage, the next thing on the list is finding things to do and places to explore. If it’s a Monday, a lot of the amazing indoor attractions and restaurants will be closed, but there is still plenty to do on any day of the week! See a concert at the Red Rock Amphitheatre, marvel at the beauty of the Cathedral of the Immaculate Conception or take a hike in the famous Rocky Mountains. You won’t regret it!
Foot Locker's investment in Rockets of Awesome is part of the online retailer's $19.5 million Series C funding round. Now, Rockets of Awesome — which hasn't had much of a bricks-and-mortar presence other than a handful of pop-up shops — will be opening ministores within Kids Foot Locker locations across the country. Rockets of Awesome is also going to begin selling on Foot Locker's children's website.
Salsbury Industries offers a complete line of metal locker, steel locker, plastic locker, vented locker, wood locker and wire locker in a wide range of colors and styles, so you are sure to find the perfect locker that suits your needs. Our locker are used for a variety of applications such as employee locker, school locker, student locker, restaurant locker, day care locker, pool locker, gym locker, club locker, fire department locker, police locker, apartment lockers and home locker. We also offer a complete line of accessories including wood locker benches, aluminum locker benches, locker bases, side panels and locks to complete your project.

Salsbury Industries offers a complete line of metal locker, steel locker, plastic locker, vented locker, wood locker and wire locker in a wide range of colors and styles, so you are sure to find the perfect locker that suits your needs. Our locker are used for a variety of applications such as employee locker, school locker, student locker, restaurant locker, day care locker, pool locker, gym locker, club locker, fire department locker, police locker, apartment lockers and home locker. We also offer a complete line of accessories including wood locker benches, aluminum locker benches, locker bases, side panels and locks to complete your project.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.

Buy Denver Lockers

×