Lockers are only available to currently enrolled students and current employees.  The University is not responsible for the contents of any locker.  Users must use the lock provided by Roosevelt University.  No stickers or posters are allowed on the lockers.  No dangerous or illegal items may be stored in lockers at any time.  Items causing unpleasant odors are not allowed.  Lockers must be able to be fully closed at all times.   Roosevelt University reserves the right to open lockers at its discretion at any time and to remove any items it believes compromises the safety or environmental quality of Roosevelt University.   Roosevelt University reserves the rights to charge for damages to the locker and may cancel this rental agreement at any time for any reason.
Rebecca, I remember a previous post that a visitor found storage at the bus station, so I called to see if still available, and it is. Lockers are $3 for the first hour and $1 per hour after that. It's difficult to find storage short term because of security/liability, esp. since 9/11. If you are staying at a hotel, they will often keep your luggage for you short term.
Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well.

Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.


We have metal lockers for sale, yes, metal lockers that are designed for many applications like first responders of all types, school corridor lockers, employee lockers, high school lockers, Athletic lockers Footlockers, and Stadium® lockers that are ideally suited for athletic team rooms to store helmets, uniforms and gear for many different sports.
The visually appealing and very durable Traditional Collection is our most widely distributed locker line. Offering the most value for typical locker applications, this collection is available in a full range of spacious sizes, from single- to six-tier configurations, as well as two-person, 16-person and wall-mounted. The addition of our new 2 person Z-Locker completes the Traditional collection.

Terry, there are many storage unit places closer to the airport, but then of course you'd have to rent a car. DIA Self Storage, for example, is less than 10 miles away. You can google map Denver International Airport, then "search nearby" for "self storage units" if you think that's something you might want to do. http://www.coloradoselfstorage.com/


In the States everybody is so concerned about liability.... We tried to store at Hertz (where we dropped the rental); no storage facility, no luck. Try a hotel; I tried several, if you are not a guest then they are not allowed. I tried the Information Centre; no luck, they had some bad experiences.... in the past. But they could not realy help me any further. One advise: try the Greyhound Bus Center. And yes! there you can store your luggage. Even my somewhat bigger suitcase. The lockers are somewhat small but high and deep enough. First 3 hours is to be paid for; $ 3 and after that a dollar for an extra hour.
Salsbury Industries is proficient at shipping a wide selection of metal lockers, wood lockers, plastic lockers, specialty products and storage solutions. Our warehouses are filled with quality products and most items ship within 1-2 business days from the date an order is received. Whether you are located around the block or around the world, you can count on Salsbury Industries to deliver quality products on time from our distribution facilities in Los Angeles, CA and Columbus, OH.
But now, the city has announced it will spend $160,000 on two pilot projects to provide 210 more storage lockers for those experiencing homelessness. Some service providers say the announcement is a move in the right direction for the city, which has found itself the subject of harsh criticism and even a federal class-action lawsuit over the enforcement of its camping ban.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
If you want lockers, welcome to the place that knows lockers! You will find we are a trusted, family-owned business that has become the largest vendor of lockers in North America and beyond. Here you can find all locker sizes, shapes and colors for schools, businesses and even for homes. Our guests tell us that they came to SchoolLockers.com because we have helped their friends and business associates choose the best lockers for their needs. When you take that wealth of experience plus our convenient and secure online shopping and combine those with the lowest shipping prices possible, you see why we are the locker authority. Give our friendly and knowledgeable staff a call, because we are always available and just a phone call away.
Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
For longer term storage, there are many self storage units around the metro area. Not cheap, but then neither is paying extra baggage fees and lugging around extra stuff not needed for another leg of your trip, as it sounds like Terry might be doing. For example, I found "Downtown Denver Self Storage" with units starting at $45 a month. http://www.downtowndenverstorage.com/
There are a number of features or characteristics which may vary in lockers. Because purchasers will need to specify what they want in each of these when ordering, it is more common to order a particular configuration rather than buy "off the shelf" in a shop, although certain very common configurations can be found in shops fairly easily. These features include:
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
×