Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
Don't take chances with a small storage company that doesn't have the nationwide resources like CubeSmart to ensure that customer service is prioritized. We're in it for the long-haul and we recognize that your satisfaction is instrumental to our success. We think you should expect more from storage and our locations in and around Denver are ready to exceed your expectations.

Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked.
Stored my luggage for several hours at Lugden. Great location just across the street from Union Station. Spoke with the owner and he said he owns the parking spot so they are always there during the day. Prices were reasonable and I felt comfortable storing my bags there while I explored Denver. The owner was nice and gave me coupons for some local businesses.

Public lockers are available on all floors of the Anderson Academic Commons for short-term storage needs.  Lockers are available on a first-come, first-served basis.  To use a locker, enter a 4-digit personalized code for locking and unlocking.  Directions for setting the 4-digit code are located inside each locker.  Lockers unlock automatically after 24 hours.
There is an honest way for supporters of a nationwide popular vote to eject the Electoral College, and that is to take away its accreditation by way of a constitutional amendment to repeal it. But that would take 2/3 of both houses of Congress and 3/4 of the states, and apparently that task gives opponents of the Electoral College the vapors.Much easier, they think, to perform an end-run on the US Constitution's amendment process through the National Popular Vote Interstate Compact.Interstate compacts are for regional cooperation in governing the use of river water, for example, or in agreeing that if a nurse in one state passes that state's licensing requirements, other states will accept that nurse's license to practice.Interstate compacts are not for the purpose of subverting the US Constitution.I hate the Electoral College, it's antiquated and obsolete, in my opinion. But I don't support the NPVIC.If people think our politics are divisive now, just wait to see what happens if the NPVIC is adopted by 270 electoral votes' worth of states.So, call Governor Polis' office at 303-866-2471 and tell him to veto senate bill 19-042, the National Popular Vote Interstate Compact. Be sure to mention the bill number! I do, however, like the idea of proportional electoral votes from each state. Winner-take-all is nowhere mentioned in any form in the US Constitution. Maine and Nebraska have the right idea.
Lockers are only available to currently enrolled students and current employees.  The University is not responsible for the contents of any locker.  Users must use the lock provided by Roosevelt University.  No stickers or posters are allowed on the lockers.  No dangerous or illegal items may be stored in lockers at any time.  Items causing unpleasant odors are not allowed.  Lockers must be able to be fully closed at all times.   Roosevelt University reserves the right to open lockers at its discretion at any time and to remove any items it believes compromises the safety or environmental quality of Roosevelt University.   Roosevelt University reserves the rights to charge for damages to the locker and may cancel this rental agreement at any time for any reason.
Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.

In the States everybody is so concerned about liability.... We tried to store at Hertz (where we dropped the rental); no storage facility, no luck. Try a hotel; I tried several, if you are not a guest then they are not allowed. I tried the Information Centre; no luck, they had some bad experiences.... in the past. But they could not realy help me any further. One advise: try the Greyhound Bus Center. And yes! there you can store your luggage. Even my somewhat bigger suitcase. The lockers are somewhat small but high and deep enough. First 3 hours is to be paid for; $ 3 and after that a dollar for an extra hour.


Public lockers are available on all floors of the Anderson Academic Commons for short-term storage needs.  Lockers are available on a first-come, first-served basis.  To use a locker, enter a 4-digit personalized code for locking and unlocking.  Directions for setting the 4-digit code are located inside each locker.  Lockers unlock automatically after 24 hours.
Now that you’ve scored yourself some Denver luggage storage, the next thing on the list is finding things to do and places to explore. If it’s a Monday, a lot of the amazing indoor attractions and restaurants will be closed, but there is still plenty to do on any day of the week! See a concert at the Red Rock Amphitheatre, marvel at the beauty of the Cathedral of the Immaculate Conception or take a hike in the famous Rocky Mountains. You won’t regret it!
Public lockers are available on all floors of the Anderson Academic Commons for short-term storage needs.  Lockers are available on a first-come, first-served basis.  To use a locker, enter a 4-digit personalized code for locking and unlocking.  Directions for setting the 4-digit code are located inside each locker.  Lockers unlock automatically after 24 hours.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

Don't take chances with a small storage company that doesn't have the nationwide resources like CubeSmart to ensure that customer service is prioritized. We're in it for the long-haul and we recognize that your satisfaction is instrumental to our success. We think you should expect more from storage and our locations in and around Denver are ready to exceed your expectations.


Plastic Lockers are ideal for high-humidity applications, as these virtually maintenance-free lockers will never rust, rot, corrode or fade. These lockers are available in multiple configurations and are backed by a 15-year warranty. Optional configurations like Lattice Lockers, or doors with other non-standard vents can be obtained through ASI Storage Solutions. Please consult our customer service team to be advised on changes in pricing and delivery lead times for all non-standard items.

Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.


Storage Auctions in Alabama | Storage Auctions in Arizona | Storage Auctions in California | Storage Auctions in Florida | Storage Auctions in Colorado | Storage Auctions in Delaware | Storage Auctions in Florida | Storage Auctions in Georgia | Storage Auctions in Illinois | Storage Auctions in Kansas | Storage Auctions in Kentucky | Storage Auctions in Maryland | Storage Auctions in Massachusetts | Storage Auctions in Mississippi | Storage Auctions in Missouri | Storage Auctions in Nevada | Storage Auctions in New Hampshire | Storage Auctions in New Jersey | Storage Auctions in New Mexico | Storage Auctions in New York | Storage Auctions in North Carolina | Storage Auctions in Ohio | Storage Auctions in Oklahoma | Storage Auctions in Pennsylvania | Storage Auctions in South Carolina | Storage Auctions in Texas | Storage Auctions in Vermont| Storage Auctions in Virginia

Quality Refurbishing Many of the old, wholesale lockers we have in stock have minimal damage and some are near brand-new condition. For lockers that need repairs, our unique multiple point inspection and repair process helps to refine these lockers to a high quality, salvaged state. We know you want to buy quality lockers and we will not be shipping out lockers that are not fully functional. To get the most out of your refurbished locker, we also offer tips on alternative ways you can utilize them. Don't want to have the same old wall locker look? Use one as a laundry room locker or a console table.


Public lockers are available on all floors of the Anderson Academic Commons for short-term storage needs.  Lockers are available on a first-come, first-served basis.  To use a locker, enter a 4-digit personalized code for locking and unlocking.  Directions for setting the 4-digit code are located inside each locker.  Lockers unlock automatically after 24 hours.
×